Description

Rotary burr tungsten Rotary burr to be used with pneumatic air tools and electric die grinders.
Shape: Arc pointed
nose
Shank:6mm
Dia: 12mm
Cutting Length: 25mm
Metal: Tungsten carbide
Cut: Double cut Application:
A tungsten carbide burr can be used for:
Cleaning welding seams
Deburring
Grinding
Shaping The speed at which you use your tungsten carbide burr in your rotary tool will depend on the material you’...re using it on and the contour being drilled. It’s safe to say – do not need to exceed 35,000 rpm. The benefits of tungsten carbide burrs:
Tungsten carbide burrs can be used on many materials:
All metals
Stone
Ceramic
Porcelain
Hard wood
Reinforced plastics Tungsten carbide burrs are much harder than HSS (High Speed Steel) burrs and are used to cut harder materials. The burrs wear less and retain their hardness under
higher temperatures. If the burrs are chipping, this could be due to the speed being too slow. It is ideal to start the burr off slow, increasing the speed
as you go along. High speeds will prevent clogging in the flutes of your burrs. When using burrs, always try to keep the burr on the move. This will prevent the burr from jabbing and digging into your material causing roughness. As with all drill Bits and burrs, let the burr do the work and apply little pressure otherwise the cutting edges of the flutes will chip, reducing the life of the burr. What’s in the box
1 x Rotary Burr Tungsten 12X25X6mm Round Point