Description

Buffing pad Buffing pad Material: Cotton
Diameter: 100mm
Bore: 6.0mm Application:
The buffing pad is supplied with a chuck adaptor spindle.
It is ideal for buffing jewelry and other metals. The concentrically sewn sections add strength to the buffing pad and it cleans surfaces without damaging it. How to use the compounds and the buffing pads:
The adaptor is used to hold the buffing pad in the drill’s chuck. Faste the correct buffing pad ...in the adaptor. Make sure the flanges are on bot sides of the buffing pad.
It would be best to use a drill press to polish metals. If a drill pres is not accessible, use adapto TCV01810 with a portable drill with a colla diameter of 43mm. Tighten the adaptor in the drill’s chuck.
The buffing pad should revolve towards you at full speed. Pass th compound lightly across the face of the buffing pad. To ensure that th compound is evenly spread, hold a clean piece of scrap metal against th face of the buffing pad. This will eliminate lumps of compound from occurring If desired, heat the item to 65 degreeC using an oven or a heater. Warmin the metal keeps the compound on the buffing pad. A cool item will draw compound from the pad and leave deposits. Use a glove to handle the warm item. Hold the metal lightly against the buffing pad. Allow the compound to d the work.
If more compound is required, apply it using a wiping motion. Do no overload the buffing pad. Use Tork Craft’s line of buffing pads and compounds to clean, polish and bring to a high gloss, all metals and plastics. Heavy Duty Cleaning
Regular Cleaning
Light Polishing
High Gloss Polishing What’s in the box
1 x Cotton Buff 100mm x 6mm Shaft